Switching The Information Display Mode - Hitachi DZMV230A Instruction Manual

G Switching the information display mode
You can switch the display mode of on-screen information:
P
ress the DISPLAY button.
• Full display mode: All types of information will appear.
• Minimum display mode: Only the recording mode, status
display and warning will appear.
The full and minimum display modes will alternate.
Note: The DVD video camera/recorder does not record the
recording date/time as a part of image. However , this informa-
tion when recording will be recorded with image as data which
can be checked on Disc Navigation screen during playback.
(See "Information display during playback" on page 53.)
G Display when recording an image of yourself
When recording with the LCD screen facing the same
direction as the lens, only the operating status and bat-
tery remaining level will appear, and the battery remain-
ing level will appear only when the battery has almost
no remaining charge.
The following operating status indicator will blink to
give warning message to user. The message can be
checked when returning the LCD monitor 180° to the
original status from the status in which the LCD screen
was facing the same direction as the lens.
: The disc has almost no free space.
: Write-protected disc is loaded.
: You are attempting to record a still on
DVD-R disc.
No display : Disc that cannot be used has been loaded.
: The disc is full, or you are attempting to
record a copy-guarded image.
Note: If the LCD screen is set facing the same direc-
tion as the lens, the LCD screen will display a mirr or im-
age (left and right reversed).
Note: If the LCD screen is set facing the same direc-
tion as the lens, you can also view subject image in the
viewfinder.
English
52
DISPLAY button
Operating status/
warning message
Battery
remaining
level