Hitachi DZ-BX31A Instruction Manual page 183

Symptom
The DISC EJECT
button is not valid when
the DVD video camera/
recorder is connected to
PC.
When the time stamp of
file in DVD-RAM is
viewed on PC, it is
different from the actual
recording time.
When DVD-
MovieAlbumSE is
started, "Disc in Drive X:
cannot be used"
appears.
An image that should
have been recorded
does not appear when
DVD-MovieAlbumSE is
started.
When executing
"Export" on DVD-
MovieAlbumSE, it will
take time to read.
"Hardware Removal"
results in error.
No USB HS (high
speed) connection even
when USB2.0 card is
used.
Cause and Correction
While the DVD video camera/recorder is connected to PC, use
Explorer to right-click the DVD video camera/recorder drive icon
and execute "Eject".
If DVD-MovieAlbumSE is running, clicking the eject button on
DVD-MovieAlbumSE will open the cover of disc insertion block of
this DVD video camera/recorder: Remove the disc.
The file system of this DVD video camera/recorder is operated on
Greenwich Mean Time (GMT), and time lag information has not
been set. With Windows
file viewed on Explorer looks different from the actual recording
time. The actual recording time will appear for date/time
indication on playback screen.
A disc other than DVD-RAM/DVD-RW (VR-mode) is loaded in
drive: DVD-MovieAlbumSE cannot be used for media other than
DVD-RAM/DVD-RW (VR-mode).
Click the "Preference" button in the dialog box, click the "Device
Setting" tab to choose the drive where DVD-RAM/DVD-RW (VR-
mode) disc is loaded in the "Drive Select" column, and then click
"OK".
Click the "Preference" button at top right of DVD-MovieAlbumSE
screen, click the "Device Setting" tab to choose the drive where
DVD-RAM/DVD-RW (VR-mode) disc is loaded in the "Drive
Select" column, and then click "OK".
• If stills are included in the range of "Export", it may take more
time because data must be re-encoded and read.
• If "Divide by Chapter" is not chosen, it may take some time
because data will be read while being re-encoded.
®
Exit Windows once, and then disconnect the DVD video
camera/recorder. If your PC uses Windows
the problem may be solved if you install Windows
Pack 3 or later.
Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker
in order to operate the USB2.0 card at HS (high speed).
®
as of January, 2006, the time stamp of
®
2000 Professional,
Reference
page
—
—
—
—
—
150
—
®
2000 Service
—
183