Hitachi DZ-BX31A Instruction Manual page 174

Message
Disc error.
Disc full. Cannot
execute.
Disc has no data.
Disc has no Play List.
Disc includes protected
scenes. Delete scenes?
Disc is full. Cannot add
control info.
Disc is not formatted.
Format the disc now?
Drive overheat. Please
retry later.
DVD-R* Disc, 16:9
mode cannot be
changed when Video
mode is STD.
DVD-R* Disc, Input
Source cannot be
changed.
DVD-R* Disc, Video
mode and 16:9 mode
cannot be changed.
END OF DISC
End scene cannot be
divided.
Error occurred. Please
replace disc or format
disc.
174
Cause & Troubleshooting
• Use another disc.
• See *3 on page 177.
• Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/
recorder.
Initialize the disc or use another disc.
• Initializing the disc will erase all data on it.
Delete unnecessary scenes before using this disc, or use another
disc.
This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
Switching of play list was selected with no play list stored.
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device
that has executed software-protect.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
• Has the disc been initialized on a PC?
Choose "YES" and initialize the disc when using it on this DVD
video camera/recorder. Initialization will delete all data on the
disc.
• See *2 on page 177.
The temperature inside the DVD video camera/recorder is too
high, and reading or writing of the data on disc may not be
performed normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
With DVD-RW (VF-mode)/DVD-R disc, the setting of 16:9 mode
will not be possible when the Video mode is STD.
* "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode).
Once a DVD-RW (VF-mode)/DVD-R disc has been recorded in
the 16:9 mode, the input source will not be changeable.
* "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode).
With DVD-RW (VF-mode)/DVD-R disc, the movie quality mode
and 16:9 mode once used for recording cannot be changed.
* "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode).
The disc is full.
You cannot record on this disc anymore. Prepare another disc or
delete unnecessary movie scenes from this disc.
Division is not possible at the end of scene.
• Abnormality has occurred with the DVD-RAM disc to be
repaired. Initialize the disc before using it, or use the another
disc. Initializing the disc will erase all data on it.
• See *2 on page 177.
Reference
page
25, 27
135
113
—
128
—
113, 116
135
45
96
96
29, 96
113
115
135