Honeywell miniMAX Quick Start Configuration Manual page 41

9.1 SETTING THE SYSTEM DATE AND TIME, CONTINUED
The time is presented as a four digit number (HHMM) where:
Type in the new time in the same four-digit format. When you have finished editing,
press the
onto all video output channels
Enter New Date
When selected, an entry window displays the current date known to the system clock.
Changes are made by overwriting the displayed date.
SIGN-ON Keyboard Operators
SIGN-OFF Keyboard Operators
ENABLE/DISABLE Video Inputs
LOCK/UNLOCK Video Input Controls
LOCK/UNLOCK Video Output Channels
ENABLE/DISABLE Alarm Inputs
SET CLOCK Current Time/Date
CHANGE PIN Number
STATUS Information
SYSTEM Configuration
The date is presented as a six digit number (DDMMYY) where:
Type in the new date in the same six-digit format. When you have finished entering the
new date, press the
instantly updated onto all video outputs.
Rev. 1.0
HH = hours in two digits (00
MM = minutes in two digits (00
key. The new time (if formatted correctly) will be instantly updated
MAX-1000 v4.**
Set Current Time/Date
Enter NEW Time
Enter NEW Date
DD = day of the month in two digits (01
MM = month of the year in two digits (01
YY = year in two digits (00
23)
59)
Enter NEW Date: as DDMMYY
140199
99)
key. The new date (if formatted correctly) will be
35
31)
12)
900.0688
9-Dec-05