Section 7: Installing Software; Installing The Setmax Software On Your Pc - Honeywell miniMAX Quick Start Configuration Manual

7.1

INSTALLING THE SETMAX SOFTWARE ON YOUR PC

A CD-ROM is included in the documentation package. This CD-ROM contains the
Commissioning Manual, Operator's Manual, the Quick Start Configuration Guide, and
the SETMAX for Windows editor software. The SETMAX software must be loaded onto
a PC or laptop in order to edit the default configuration. The SETMAX program requires
approximately 6 MB of space on the hard drive. If a CD-ROM is not available, please
contact Honeywell Technical Support and request SETMAX for Windows® on 3½-inch
diskettes.
Perform the following steps to install SETMAX for Windows® onto your PC or laptop:
1) Load the CD-ROM into the CD-ROM drive on your PC or laptop.
2) Select the Windows START button
3) Select Run.
Browse the CD directory and locate the Setup.exe file.
4) Select Setup.exe and click on the Open button. Select OK in the RUN window.
Follow the setup prompts.
The SETMAX software will be installed on your hard drive at the following location:
C:\Program Files\Setmax.
You may create a shortcut to Setmax.exe on your desktop if desired.
Rev. 1.0
SECTION 7:
INSTALLING SOFTWARE
14 900.0688
9-Dec-05