Troubleshooting - Hisense LCD2004US User Manual

Appendix

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the problem and
some solutions.
Problem
TV will not turn on
No picture, no sound
No sound, picture OK
Poor sound, picture OK
Poor picture, sound OK
Poor reception of broadcast channels
Multiple images
Poor colour or no color
The remote control does not operate
NOTICE:
Although the LCD screen is made with high-precision technology and has effective pixels of 99% or more,
black dots may appear or bright points of light (red, blue or green) may appear constantly on the LCD
screen. This is a structural property of the LCD panel and is not a malfunction.
Solution
Make sure the power cord is plugged in, then press POWER.
The remote control batteries may be dead. Replace the batteries.
Check the antenna/cable connections.
The sound may be muted. Press VOL+.
The station may have broadcast difficulties. Try another channel.
The station may have broadcast difficulties. Try another channel
Check the antenna connections.
The station may have broadcast difficulties. Try another channel.
Adjust the picture from the menu.
The station may have broadcast difficulties. Try another channel.
Check the antenna connections.
If you are using a VCR, make sure the SOURCE button is set correctly.
The station may have broadcast difficulties. Try another channel.
Use a highly directional outdoor antenna.
The station may have broadcast difficulties. Try another channel.
Adjust the TINT and COLOR in the menu.
Check to see if the SOURCE mode is properly set.
There may be an obstruction between the remote control and the
remote control sensor.
The remote control batteries may be dead. Replace the batteries.
-20-