2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 60495...
Trigger on invites accidents. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. Item 60495 For technical questions, please call 1-800-444-3353. Page 3...
These carry important safety information. If unreadable or missing, contact 2. Use auxiliary handles supplied with the tool. Harbor Freight Tools for a replacement. Loss of control can cause personal injury. 7. Avoid unintentional starting. 3. Hold power tools by insulated gripping surfaces Prepare to begin work before turning on the tool.
If any abnormal as tingling, numbness, and white or blue fingers), vibration occurs, stop use immediately. seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. Item 60495 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Page 6 For technical questions, please call 1-800-444-3353. Item 60495...
Risk of Fire. Alternating Current Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Amperes Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 60495 For technical questions, please call 1-800-444-3353. Page 7...
No Load Speed 0-2800 RPM 1/2″ in Steel 1/2″ in Concrete Drilling Capacity 1″ in Wood (Hammer Drill and Drill mode) 1/16″ to 1/2″ Chuck Size Three Jaw Key Type 4006176 Page 8 For technical questions, please call 1-800-444-3353. Item 60495...
The power cord must reach the work area with enough extra length to allow free movement while working. Page 10 For technical questions, please call 1-800-444-3353. Item 60495...
3. Clean the bit flutes regularly while drilling. 6. When drilling deep holes, work in stages, use a short bit for the beginning of the hole, then change to a longer bit. Item 60495 For technical questions, please call 1-800-444-3353. Page 11...
• damaged cord/electrical wiring, • cracked or broken parts, and • any other condition that may affect its safe operation. Page 12 For technical questions, please call 1-800-444-3353. Item 60495...
See Extension Cords in Grounding section on page 6. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 60495 For technical questions, please call 1-800-444-3353. Page 13...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. Item 60495...
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.