Chicago 3/8" single speed, electric drill operating instructions 46804 (16 pages)
Summary of Contents for Chicago Electric 68856
Page 1
18 Volt Cordless Driver Combo Pack Item 68856 1/2 IN. Drill / Driver 1/4 IN. Impact Driver Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. Page 2 For technical questions, please call 1-800-444-3353. SKU 68856...
Many accidents into an electrical outlet. Turn off the tool, and are caused by poorly maintained power tools. unplug it from its electrical outlet before leaving. SKU 68856 For technical questions, please call 1-800-444-3353. Page 3...
To reduce the risk of vibration-related injury: 10. Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving. Page 4 For technical questions, please call 1-800-444-3353. SKU 68856...
Read the manual before set-up and/or use. WARNING marking concerning Risk of Fire. Do not cover ventilation ducts. Keep flammable objects away. SKU 68856 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
Parts List and Assembly Diagram on pages 12 and 13. Torque Setting Speed Ring (4) Selector (16) Chuck (2) Direction Switch Work Light Trigger (12) Bit Groove Battery Button Battery Pack (11) Page 6 For technical questions, please call 1-800-444-3353. SKU 68856...
Page 7
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on pages 14 and 15. Collar (11-1) Anvil (2) Direction Work Light Switch Trigger (4) Bit Groove Battery Button Battery Pack (16) SKU 68856 For technical questions, please call 1-800-444-3353. Page 7...
(0-400 RPM) to the higher speed (0-1200 RPM). 6. Set the desired torque setting by rotating the Torque Setting Ring (4) to the desired setting. 7. Use the torque setting (marked by the drill icon) for drilling. Page 8 For technical questions, please call 1-800-444-3353. SKU 68856...
Drill Handle so it does not fall off during use. 1. For best performance, use high speed drill bits for metal or steel drilling and turn the torque setting to the drill icon. SKU 68856 For technical questions, please call 1-800-444-3353. Page 9...
Page 10
6. Clean then store the Impact Driver indoors and out of children’s reach. WARNING! If the supply cord of this power tool’s charger is damaged, it must be replaced only by a qualified service technician. Page 10 For technical questions, please call 1-800-444-3353. SKU 68856...
3. Wear ANSI-approved safety goggles and NIOSH- approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. SKU 68856 For technical questions, please call 1-800-444-3353. Page 11...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 12 For technical questions, please call 1-800-444-3353. SKU 68856...
Page 16
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.