Troubleshooting - Belkin 1000VA Quick Install Manual

Troubleshooting

If the UPS failed to operate properly, please review the following points first.
Symptom
LCD Screen is
on, but audible
alarm is heard
intermittently.
UPS is functioning
but audible alarm is
heard continuously.
Communication lost
between UPS and
computer.
Belkin Ltd.
4 Pioneer Avenue
Tuggerah NSW 2259
Australia
Tel: 02 4350 4600
Fax: 02 4350 4700
11
Possible Cause
UPS is not
connected
properly to
the mains.
Overload of
the UPS.
Cable is not
properly connected.
© 2011 Belkin International, Inc. All rights reserved. All
trade names are registered trademarks of respective
manufacturers listed.
Remedy
Connect the UPS
according to the
installation guide.
Verify that the load
matches the UPS
capacity stated in
the specifications.
Check if the USB
cable is firmly
connected to the
USB port of the
computer and
confirm the setting.
8820-00942