Computer Connection - Belkin 1000VA Quick Install Manual

3 - Charging
This unit is shipped from the factory with its internal battery fully charged, however
some charge may be lost during shipping and the battery should be recharged prior to
use. Plug the unit into an appropriate power outlet and allow the UPS to charge fully
by leaving it plugged in for at least 10 hours with no load (no electrical devices such as
computers, monitors, etc) connected.
10 Hours

4 - Computer Connection

Connect your PC, monitor and modem/router into the outlets at the back of the
UPS labelled "Battery Backup". Battery power is automatically provided in case
of power failure.
3