Starting Up - HTC Touch User Manual

1.3 Starting Up

After inserting your SIM card and battery, you can now power on and start
using your device.
Turn your device on and off
To turn on the power
•
Press and hold the POWER button for a few seconds.
When you turn on your device for the first time, a Quick Start Wizard
will guide you through the calibration process and the setup of
regional settings, date and time, and password. For more information
about touch screen calibration, see "Calibrate the device".
To turn off the power
• Press and hold the POWER button for a few seconds.
A message will then be displayed, prompting you whether or not to
turn off the device completely.
Charge the battery
New batteries are shipped partially charged. Before you start using your
device, it is recommended that you charge the battery. Some batteries
perform best after several full charge/discharge cycles. You can charge the
battery in two ways:
•
Charging the device's battery by connecting the power adapter.
•
Connecting your device to a PC via the provided USB Sync cable.
Note
Only the AC adapter and USB cable provided with your device should be
used to charge the device.
Charging is indicated by a solid amber light on the left LED indicator.
As the battery is being charged while the device's power is on, a charging
icon ( ) will be shown on the title bar of the Today screen. After the
battery has been fully charged, the left LED becomes green and a full
battery icon (
Warning!
) appears on the Today screen's title bar.
• Do not remove the battery from the device while you are charging it
using the AC or car adapter.
• As a safety precaution, the battery stops charging when it overheats.
Getting Started 23