Video Setting Menu - Denver TFD-2211 User Manual

AV, SCART

VIDEO SETTING MENU

The menu setup of AV/
mode, except the "
NOTE
If no signal input in analog TV,VGA,
This unit will switch to standby mode automatically
if no signal input more than 5 minutes.
If the input source is SCART, this unit will recognize RGB or CVBS signal automatically;
when normal RGB signal appears,
When connect with SCART plug, it will switch to SCART mode automatically.
out the SCART plug, it will switch to previous mode, it also support channel plus.
AND COMPONENT MENU SETUP
SCART/ COMPONENT
"section . You can find it
COMPONENT
this unit will switch to RGB display mode automatically.
modes is the same as that of analog TV
in preceding pages.
, SCART, the screen will show as below.
NO SIGNAL
14
VGA
4:50
When pull