Dvb Operation; Enter Main Menu - Denver TFD-2620DVBT User Manual

Basic operation
NOTE:
-In this manual, the OSD (On Screen Display) maybe different from your TV's because it is just example to help
the TV operation.
-Be sure to select the DVB source before operation.

ENTER MAIN MENU

Press the DVB-MENU on the remote control to bring up the main menu on the screen and press it again to return
to the previous menu or return to TV viewing.
ADJUST THE OSD ON SCREEN
1. Press button select each menu.
2. Press button and then use
3. Press DVB-MENU or
4.Press OK to confirm your settings
NO SIGNAL OR NO SERVICE
There is no signal or service input
Channel List
1. Press the DVB-MENU on the remote control to bring up the main menu on the screen and use
select the Channel List menu.
2. Press the OK to confirm your selection and there will a Channel List menu on the screen as below:

DVB operation

button to select and adjust the available menus.
button to return to previous menu and press TV-EXIT to return to TV viewing
20
to