ATCOM AX4G User Manual page 16

AX4G User Manual
4. Check the GX01 version:
[root@localhost ~]# dmesg
wctdm_init_GSM CARD:0
VoiceGSM System:0a
Module 0: Installed -- AUTO GSM(version 0x49)
wctdm_init_GSM CARD:1
VoiceGSM System:0a
Module 1: Installed -- AUTO GSM(version 0x49)
... ...
... ...
Notice:
only the GX01 0x41 and above version support the following function: bulk SMS sending,
multi-language for SMS content and Pin number unlock;
only the GX01 0x46 and above version support SMS receive function.
5. Input PIN-Number for the SIM card.
Users can add the following red line into "/etc/asterisk/dahdi-channels.conf" file. After setting,
please restart asterisk to make the setting effective.
;;; line="2 WCTDM/6/1 FXSKS (In use) (SWEC: MG2)"
pinnum=1234
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
6. Please use the following command to read the IMEI number of GX01:
[root@localhost ~]# cat /proc/dahdi/imei_read_1
IMEI0: 355842020258444, IMEI1: 355842020187437, IMEI2:355842029087438 , IMEI3:
355842020199439
7. If users want to change the IMEI information, Please run the command like those.
For example, user want to change the channel 1 IMEI to the serial number:
355842020257974. Make sure the serial number is availability.
localhost*CLI> gsm set imei 1 355842020257974
gsm set imei cardnum=1 value=355842020257974
gsm set imei ok
www.atcom.cn Email: support@atcomemail.com 12