ATCOM AX4G User Manual page 13

AX4G User Manual
3. Please run dahdi_cfg –vv command.
[root@localhost asterisk]# dahdi_cfg -vv
DAHDI Tools Version - 2.6.2
DAHDI Version: 2.6.2
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)
4 channels to configure.
Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
4. Please add the following line at the bottom of the "/etc/asterisk/chan_dahdi.conf" file. Users
can run the following command in the CLI.
[root@localhost ~]# echo #include dahdi-channels.conf >>/etc/asterisk/chan_dahdi.conf
5. If users want to load the asterisk, users can run the following command:
[root@localhost ~]# asterisk –vvgc
6. Please run dahdi show channels command
You should see 4 channels as the following:
localhost*CLI> dahdi show channels
Chan Extension Context
pseudo
1 from-pstn
2 from-pstn
3 from-pstn
4 from-pstn
7. Please add the encoded mode for receiving message in the "chan_dahdi.conf" file
If the GSM modules version are 0x41 or above it, And users need receive messages via the
GSM modules. Please modify the following parameters.
[channels]
;
www.atcom.cn
Language
default
Email: support@atcomemail.com
MOH Interpret
default
default
default
default
default
State
In Service
In Service
In Service
In Service
In Service
9