Adjustment With Microsoft Windows 95/98/Me/Xp Operating System - Mitsubishi Electric LC62 CHASSIS XL6500LU Service Manual

Adjustment with Microsoft
1. Starting
1. Start Windows ® 95/98/Me/XP.
2. Select [Start] - [Programs] - [Accessories] - [Communications] - [Hyper Terminal] in order.
The [Connection Description] window will open.
Note: You can select [Start] - [Programs] - [Accessories] - [Hyper Terminal] in order and double-click [hypertrm.exe] in Windows
2. Hyper Terminal Setting
1. Make settings on the [Connection Descrip-
tion] window referring to the table on the
right.
3. Adjustment
Type the adjustment command and the adjustment value on the Hyper Terminal window in capital alphanumeric letters, and
press the [ENTER] key.
4. Writing Adjustment Value
Type the adjustment command and the adjustment value on the Hyper Terminal window in capital alphanumeric letters, and
press the [ENTER] key.
Note: This step is not necessary for "ADC offset/gain adjustment," which is carried out automatically.
5. Closing
Click on the Close button in the upper-right corner of the window to exit the Hyper Terminal.
Close all the opening windows before exiting Windows
Windows 95/98/Me/XP Operating System
® ®
Item
Connection
Port settings : Bits per second
: Data bits
: Parity
: Stop bits
: Flow
Settings : Emulation
ASCII setup : ASCII Sending
: ASCII Receiving
® 95/98/Me/XP.
- 2 -
Setting
Port (COM1-COM4)
9600
8
None
1
control
VT100
Send line ends with line feeds
Echo typed characters locally
Line delay : 1000 milliseconds
Character delay : 10 milliseconds
Append line feeds to incoming line ends
® 95.