Direct Commands; Function Commands; Menu Setting Commands - Mitsubishi Electric LC62 CHASSIS XL6500LU Service Manual

[Example] When displaying the MENU selection bar. (Figures and symbols enclosed in quotation marks are
ASCII codes.):
Sending commands
from the PC, etc.
'30' '30' '72' '35' '34' '0D'
00r54

4.4 Direct commands

The direct commands are used for the keystone setting of this projector with the value.
ITEM
VOLUME
KEYSTONE (vertical)
KEYSTONE (horizontal)
How to set the value
Use the character or ASCII code as shown below to set the value.
Character +
ASCII '2Bh' '2Dh' '30h' '31h' '32h' '33h' '34h' '35h' '36h' '37h' '38h' '39h'
[Example] When setting the volume to 15. (Figures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands
from the PC, etc.
'30' '30' '56' '4C' '31' '35' '0D'
00VL15

4.5 Function commands

screen is being displayed, the splash screen is not muted but only canceled.)
The mute commands are used for the mute setting of this projector with the 0 (30h) and 1 (31h).
ITEM
AV MUTE
PinP
MAGNIFY
FREEZE
Function canceling

4.6 Menu setting commands

The menu setting commands are used for the menu setting of this projector. If the personal computer sends the
command without attaching the data code, the projector attaches to the received command its current setting
value as the data code and send it back to the PC.
ITEM
COLOR ENHANCER
COLOR ENHANCER-
USER-GAMMA MODE
COLOR ENHANCER-
USER-RGB-COLOR
COLOR ENHANCER-
USER-RGB-TINT
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR TEMP.-USER
(CONTRAST)
'30' '30' '72' '35' '34' '0D'
00r54
(Not executable in stand-by mode. Possible only to read during muting.)
Function
Character
VL 56h 4Ch
KS 4Bh 53h
KSH 4Bh 53h 48h
- 0 1 2
'30' '30' '56' '4C' '31' '35' '0D'
00VL15
(Not executable in stand-by mode. When the mute commands are sent while the splash
Character
MUTE 4Dh 55h 54h 45h
PiP 50h 69h 50h
MGNFY 4Dh 47h 4Eh 46h 59h
FRZ 46h 52h 5Ah
FNCOFF 46h 4Eh 43h 4Fh 46h 46h
(Not executable in stand-by mode. Possible only to read during muting.)
Function
Character
CE 43h 45h
CEU1GS 43h 45h 55h 31h 47h 53h
CEU1C 43h 45h 55h 31h 43h
CEU1T 43h 45h 55h 31h 54h
PP 50h 50h
QQ 51h 51h
A 41h
P 50h
Status code
from the projector
ASCII
3 4 5 6
Status code
from the projector
Function
ASCII
ASCII
0 (AUTO), 1 (PRESENTATION), 2 (STANDARD),
3 (THEATER), 4 (sRGB), 5 (USER)
0 (DYNAMIC), 1 (NATURAL), 2 (DETAIL)
±10
±10
±30
±30
1 (STANDARD), 2 (HIGH), 3 (LOW), 4 (USER)
±30 ±30 ±30 (R, G, B)
6
Description
Command operating the same as the
MENU button
Command receipt confirmation
(Command echo back)
Data
00– 1
±35
±25
7 8 9
Description
Command for setting the volume
Command receipt confirmation
(Command echo back)
Data
0 (OFF), 1 (ON)
0 (OFF), 1 (ON)
0 (OFF), 1 (ON)
0 (OFF), 1 (ON)
Data