Lead wire routing after the drive fan and
DRIVE PCB ASSY are attached
Drive fan
ND
Run the ND lead wire
through the clamper of fan holder L.
Retain the DP and SD lead wires
using the clamper.
Retain the SL,SX and SZ lead wires
using the clamper.
DRIVE PCB ASSY
DG
DR
DB
DP
Run the SC,SE and SF lead wires
through the clamper.
Fig. 5-6
- 36 -
Remove slack in the SL lead wires
by pulling them in the arrow' s direction.