Connecting To A Display And Audio System Using Dual Hdmi - Oppo BDP-93AU User Manual

I N S T A L L A T I O N

Connecting to a Display and Audio System using Dual HDMI

BDP-93AU provides a Dual HDMI connection to make sure you can enjoy the highest possible
video quality and resolution, in addition to the high bit rate audio content. You can use the
included HDMI cables to connect the HDMI 1 output to your HDTV and connect the HDMI 2
output to your receiver, also set the "Primary Output" option in the Video Setup section of the
Setup menu to "HDMI 1" (see page 52 for details). In this way you can utilize the dedicated
video processor available for HDMI 1 output, and allow your receiver which has no HDMI 1.4
inputs to work without any loss on the digital audio signals.
Keep in mind that while Dual HDMI connection is only a recommended method, in fact, both of
the HDMI outputs (HDMI 1 and 2) on the BDP-93AU can send out digital audio and video
signals at the same time, and can be connected to your TV or receiver/amplifier separately (see
page 10 and 14 for details).
NOTE
Please refer to the notes of HDMI connection available on page 14.
If your receiver does not have audio input capability, please try alternate connection
methods discussed on pages 15 to 17.
Rear Panel
HDMI Cable
2
HDMI IN
Method 9 – Dual HDMI Connection
HDMI Cable
1
18
HDMI IN