Table of Contents
Advertisement
I N S T A L L A T I O N
Easy Setup
Step: 3/6
Confirm Output Resolution
Choose the output resolution which best matches
your TV.
The output resolution has been changed.
15s
Change
Select OK to save the new setting. Select
15 seco
Cancel to rollback to the previous output
rollback
resolution.
P
e r
v
o i
u
s
NOTE
If you cannot get a picture using the HDMI or Analog (component) output. please
connect the player to the TV using the composite video output, and then use the Setup
Menu to adjust the player settings.
Video up-conversion over the Analog (component) output is only available for
unencrypted discs such as home video and consumer-created contents.
commercially pressed DVD discs are CSS-encrypted and will be limited to 576i/576p
resolution. This restriction applies to the component output only. The HDMI output is
protected with HDCP and has no such restriction.
Determine the Display Aspect Ratio
Standard Definition, or 4:3 TV
The aspect ratio is the proportional ratio of a TV screen's width and height. Older television sets generally
have a 4:3 aspect ratio – the width is 4/3 (or 1.33) times the height. Newer wide screen television sets have a
16:9 aspect ratio – the width is 16/9 (or 1.78) times the height. For best performance, the video output of your
player needs to match the screen aspect ratio of your TV. Since almost all Blu-ray Discs and many DVD discs
are released in the wide screen format, it is highly recommended that you use a wide screen TV with the
player.
The Aspect Ratio selections are 4:3 Letterbox, 4:3 Pan & Scan, 16:9 Wide, and 16:9 Wide/Auto.
Depending on your selection and the video format recorded on the discs, image appearance on the TV screen
can be one of the following:
Press the UP/DOWN ARROW buttons to select the
desired output resolution, then press the ENTER
button. The player will apply the selected output
Auto
resolution and ask you to confirm the selection. If
1080p
your TV supports the selected resolution, you will
1080i
see a dialog box with a count-down clock. Use the
720p
LEFT ARROW button to highlight the "OK" option
480p/576p
and press the ENTER button to save the resolution
480i/576i
setting. If your TV does not support the selected
Source Direct
resolution, you may see a black screen or an error
message. In this case please wait for 15 seconds
and the Easy Setup screen will reappear. Select a
Enter
N
e
t x
different resolution that your TV can support.
24
Wide screen, or 16:9 TV
Most
Advertisement
Table of Contents
