Connecting To A Tv And A/V Receiver Via Dual Hdmi - Oppo BDP-105AU User Manual

I N S T A L L A T I O N

Connecting to a TV and A/V Receiver via Dual HDMI

The BDP-105AU provides a "Dual HDMI" connection to make sure you can enjoy the highest
possible video quality, in addition to high bit rate audio content. You can use the included HDMI
cable to connect the HDMI 1 output to your HDTV and use another HDMI cable (not included) to
connect the HDMI 2 output to your receiver by setting the Dual HDMI Output option in the Setup
Menu to Split A/V (see page 55 for details). In this way you can utilise the dedicated video
processor available for the HDMI 1 output, and allow your receiver which has no HDMI 1.4 inputs
to work without any loss to the digital audio signals.
This configuration is recommended when you have a 3D-compatible display, but your receiver is
not 3D-compatible. This allows you to send the video signal (3D, in this case) directly to the TV
and the audio signal to the receiver to be distributed to your speakers as it normally would.
NOTE
Please refer to the notes on HDMI connections available on page 11.
If your receiver does not have HDMI audio input capability, please try the alternate connection
methods discussed on pages 18 and 19.
Rear Panel
HDMI Cable 2
HDMI IN
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
HDMI Cable 1
HDMI IN
12