Internet Connection Through Wireless Adaptor - Oppo BDP-93AU User Manual

I N S T A L L A T I O N
NOTE
Only connect the LAN port of the player to an Ethernet port that supports 10BASE-T or
100BASE-TX. Connecting to any other ports or jacks, such as a phone jack, can
damage the player.
Streaming services such as Netflix and Blockbuster may require membership and may
also be limited to service in the US only.

Internet connection through wireless adaptor

The wireless adaptor included in the BDP-93AU package has been pre-configured to work with
BDP-93AU player. It is compatible with 802.11b/g/n 2.4GHz wireless networks.
Make sure the broadband Internet connection is available and the Wi-Fi function on your
wireless router or access point has been turned on, then plug the adaptor into one of the two
USB2.0 ports available on your BDP-93AU.
After the physical connection, some network configuration is required. Please refer to the
Network Setup section on page 74 for details.
A 6-foot USB extension cable is also included in the package. Connect it between the USB port
on the player and your wireless adaptor if needed.
Rear Panel
Broadband Internet
Connection
Internet
Internet
USB IN
Wireless Adaptor
1 2 LAN 3
WiFi
Wireless Router/Access Point
20
4