Table of Contents
Advertisement
BASIC OPERATIONS
Disc Playback
POWER
STOP
NOTE
During DVD and some Blu-ray Disc playback, pressing the STOP button for the first time
brings the player to a pre-stop mode. You can resume playback from the stopped point
by pressing the PLAY button. This pre-stop mode allows you to change the player
settings and then resume playback. To completely stop playback, press the STOP
button twice.
Certain Blu-ray Discs with BD-Java technology do not support the pre-stop mode.
Pressing the STOP button during playback of such discs will completely stop the disc.
Pressing the PLAY button once the disc is stopped will restart it from the very beginning.
This unit consumes a tiny amount of power even when it is turned off to STANDBY
mode. If it is not to be used for a long time, unplug it from the household AC outlet.
Fast Playback
REV
1
Press the POWER button to turn on the player.
2
Press the OPEN/CLOSE (OPEN) button to eject the disc tray.
OPEN
3
Place the disc with the label side facing up and the recorded
side facing down.
4
Press the OPEN/CLOSE (OPEN) button again to retract the
tray.
5
The player will read the disc information and starts playback.
6
Depending on the content of the disc, a menu or navigation
screen may appear. Please use the navigation ARROW and
SELECT buttons to select the content to play.
7
To stop playback, press the STOP button.
PLAY
8
To turn off the player, press the POWER button.
You may fast forward or reverse during playback.
FWD
1. Press the FWD button on the remote control and the player
starts fast forward playback. Each press of the FWD button
switches the playback speed in the following sequence:
5
1
2
4
3
27
DVD-A
SACD
DVD-A
SACD
Advertisement
Table of Contents
