Special Storage Areas - Maytag RSD2400 User Manual

SPECIAL STORAGE AREAS
To replace the shelves:
Crispers
1. Tilt the shelf and insert the right rod ends into the The Vari Crisper allows the amount of moisture in the
upper portion of the oblong holes in the freezer wall. crisper to be controlled tbr storing either fi'uits or I ] _
2. Lower the left side of the shelf and insert into the vegetables. _".
oblong holes in the left side of the freezer wall. Make
sure the shelf is secure before loading.
Setting the Vari Crisper Control
Move the slide control to "FRUITS" for a low moisture
c, ", emdromnent and to "VEGETABLES" for high moisture,
i _ ', To remove tile Crisper Drawers: _
1. Pull out to the stop position. _,
Freezer Baskets (select models)
2. Tilt up the drawer front and pull out.
Your refrigerator has three freezer baskets--one
shallow Easy, Glide, one Pizza and one deep Easy Glide. To replace the Crisper Drawers: _
Each glides out for more convenient access to the 1. Align the drawer rollers in the tracks. J'_"
frozen food. The Pizza basket is designed with a lower 2. Lift the drawer front and push in. right side for easy storage of frozen pizzas, All baskets
can be removed for cleaning. In addition, the shallow To remove the Crisper Shelf: _ _,
Easy Glide and Pizza baskets can be adjusted up or 1. Remove the crisper drawers.
down to accommodate various sized packages.
To remove the baskets: 2. Remove the glass insert. Reach in from the
underside and tilt up. Carefully remove the insert.
1. Pull the basket toward you until it stops. Lift the
front of the basket and
pull
until it stops again. 3. Lift the front of the crisper shelf and pull out. It may
2. Lift the basket up and over the front tabs. be necessary to remove the lower ref_'igerator
shelves so the crisper shelf can be tilted for removal.
To replace the baskets:
Reverse the above procedure. To replace the Crisper Shelf:
To adjust tim shallow Easy Glide and Pizza baskets: Reverse the procedure for removing the crisper shelf.
1. Remove the basket as directed previousl_
MeatCheese Drawer
'2. Place one of the bottom two hea, T wires in the track
and replace the basket. Fresh meat, luncheon meat and cheese need to be I
stored in the coldest part of the refrigerator to
I
maximize storage time. The MeaUCheese drawer
provides these colder temperatures because air from
the freezer is directed into the drawer.
Setting the Temperature Control
To regulate the amount of cold air entering the
Meat/Cheese drawer, move the temperature slide
control. Set the slide control to the "DELI/CHEESE"
t
(right) position for storage of luncheon meat and '
cheese. Set the slide eontrol to the "FRESH MEAT"
(left) position to pro_dde the lowest temperature for
fresh meat storage. ' ,'
PAGE 5