Ice Service - Maytag RSD2400 User Manual

ICE SERVICE
Twist ice Cube Trays
• After your refrigerator has been hooked up to the
Your refrigerator comes equipped with twist ice cube water suppl_; move the wire lever arm into the down
position. This will start its operation. The ice maker
trays and an lee storage bin. To release the frozen cubes will fill with water when the freezer reaches the
hold the trays upside down over the ice storage bin and proper temperature. With a newly installed
t_xqst both ends. refrigerator this could take up to 24 hours.
• Discard all the cubes from the first two or three
batches made. These initial batches of"ice cubes may
be irregular in shape and discolored.
• When the ice cubes are ejected it is normal for several
cubes to be joined together at the ends. They can
easily-be broken apart, The ice maker will continue to
make ice until the supply of ice cubes raises the wire
lever arm, shutting the ice maker off.
• To manually stop the operation of the ice maker, move
the wire lever arm into the up position.
• Certain sounds may accompany the various operating
cycles of the ice maker:
--buzzing of the water valve
--running of the water as the tray fills
--rattling of ice cubes faJling into an empty ice bin
• If the ice is not used frequently, the ice cubes will
Automatic Ice Maker (optional)
become cloudy; shrink, stick _ogether and taste stale.
Emp)- the ice storage bin periodically and wash it in
Your refrigerator has been designed so an automatic ice lukewarm water. Be sure to dry the bin before
maker can be easily and quie!dy installed. If your replacing it.
refrigerator is equipped with an automatic ice maker,
there are some things you should knmv about its • To remove the ice bin, pull it forward, away from the
operation: ice maker. To avoid the ice maker dumping ice while
the bin is removed, turn the ice maker off by Jilting
the wire lever.
• To replace the ice bin, reverse the above procedure.
Turn the ice maker on by lowering the wire arm.
• Beverage and foods should not be placed in the ice
storage bin for quiek chilling. These items can block
the wire lever arm, causing the ice maker to
malfunction.
PAGE 10