Connecting External Components
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
OPEN/
CLOSE
TUNER
DVD/CD
TAPE
AUX/USB
FM
STANDBY/ON
STANDBY/ON
MULTI JOG
ECHO
1
2
PLAYBACK
REC/PLAY
FULL LOGIC CONTROL
CD SYNCHRO RECORDING
(not supplied)
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX to select AUX.
•
' AUX' appears in the display.
13
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
Connecting the FM Antennas
RADIO ANTENNA
RADIO ANTENNA
FM (75 )
FM (75 )
LINE OUT
VIDEO OUT
R
L
P
P
Y
R
B
COMPONENT VIDEO OUT
SPEAKERS OUT
(IMPEDANCE 4
)
R
L
1
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Note
ENG
FM Antenna (supplied)
14