Connecting External Components
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
(not supplied)
1
Connect AUX IN on the player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX to select AUX.
•
' AUX' appears in the display.
19
Downloaded From Disc-Player.com Samsung Manuals
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
Connecting the FM Antennas
FM Antenna (supplied)
1
Connect the FM antenna supplied to the FM COAXIAL Jack.
2
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Note
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the
temperature inside the unit could rise and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or
ventilation holes are covered with a newspaper or cloth, heat may build up
inside the unit and fire may result.)
ENG
iPod
20