Listening To A Cassette - Samsung MAX-DA54 User Manual

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to the section entitled
"Precautions When Using Audio Cassettes" on page 59.
STANDBY/ON
ECHO
1 2 Press TAPE on
Switch the system
on by pressing the player to
select the Tape
STANDBY ON.
function.
4 5
Press the > button.
Press the I<<, >>I
The cassette starts
button if necessary.
playing.
• •
Side A,B:Tape ( >) button Rewind the cassette ,press the I<<
button.
Press Tape 1/2 button to select the
•
Fast-forward the cassette, press the
cassette to be played.
>>I button.
When the Tape magnetic core can't auto restore, refer to the below methods:
Note
1. In Standby/On mode, press and hold the STOP button for 5 seconds, the unit will be
reseted. then when you turn on the unit, the tape deck will be restored.
2. In tape stop mode, press and hold the STOP button for 5 seconds, the tape deck will be
restored.
3. If you first use the main set, when you turn on the unit, the tape deck will be restored.
47
TUNER DVD/CD TAPE AUX/USB
FM
MULTI JOG
Press the PUSH
3
EJECT ( ) of the
cassette deck to open
the cassette door and
insert a cassette.
•
Insert a cassette with the
recording/playback side facing
the cassette holder, and then
push the cassette door shut.
6
Press STOP button
to finish playback.
Coping a Cassette(Dubbing)
ou can copy a cassette from Tape 1 to Tape 2.
Y
• Normal speed dubbing in selecting Tape function mode.
• You do not need to adjust the volume, as it has no effect on the recording.
• Take care not to insert the tape to be copied in Tape 2, as it will be erased when
you start recording.
STANDBY/ON
ECHO
1 2
Switch the system Insert a blank
on by pressing
cassette in Tape 2.
STANDBY/ON.
Press DUBBING
Press
4
5
button to copy a
STOP button to
cassette.
finish coping.
The appropriate indications
are displayed and the
cassette in Tape 1 is copied
to the cassette in Tape 2.
ENG
TUNER DVD/CD TAPE AUX/USB
FM
MULTI JOG
Insert the tape to
3
be copied in Tape 1.
Note
The Dubbing function is only
available when the TAPE 1
and TAPE 2 are in stop mode.
48