Table of Contents
Advertisement
Connecting External Components
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
(not supplied)
1
Connect AUX IN on the player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX to select AUX.
•
' AUX' appears in the display.
13
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
Connecting the FM Antennas
1
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
2
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Note
ENG
FM Antenna (supplied)
14
Advertisement
Table of Contents
