Foxconn 915M03 Series Manual page 65

vPWRON After PWR-Fail (Default: Off)
This option is used to set what action the PC will take with the power supply
when it resumes after a sudden power failure. The available options are: Off
(remain in turn off status),On (auto power on) and Former-Sts (resume with the
previous status).
vCPU THRM-Throttling (Default: 50.0%)
This option is used to specify the CPU speed (at percentage) to slow down
the CPU when it reaches the predetermined overheat temperature. The
setting values are 75.0%, 50.0%, 25.0%.
vPower Management Events
Press <Enter> to set the items of power management events. Please
refer to page 58.
vPrimary IDE 0, Secondary IDE 0 (Default: Disabled)
When these items are enabled, the system will restart the power saving time-
out counters when any activity is detected on any of the drives or devices on
the primary or secondary IDE channels. The setting values are Disabled and
Enabled.
vFDD, COM, LPT Port (Default: Disabled)
when this item is enabled, the system will restart the power saving time-out
counters when any activity is detected on the floppy disk drive, serial ports, or
the parallel port.
vPCI PIRQ[A-D]# (Default: Disabled)
When this option is disabled, any PCI device set as the Master will not power
on the system.
915M03 Series User Manual
Chapter 3 BIOS Description
57