Table of Contents
Advertisement
S/PDIF Out Connector: SPDIF_OUT
The S/PDIF out connector is capable of providing digital audio to external speak-
ers or compressed AC3 data to an external Dolby digital decoder.
Note:The empty pin of SPDIF cable should be aligned to empty pin of S/PDIF
out connector.
Chassis Intruder Connector: INTR
The connector connects to the chassis security switch on the case. The system
can detect the chassis intrusion through the status of this connector. If the con-
nector has been closed once, the system will send a message. To utilize this
function, set " Case Open Warning" to " Enabled" in the " PC Health Status" section
of the CMOS Setup. Save and exit, then boot the operating system once to make
sure this function takes effect.
Chapter 2
915M03 Series User Manual
Installation Instructions
GND
SPDIF_OUT
Empty
1
+5V
SPDIF_OUT
1
INTRUDERJ
GND
INTR
27
Advertisement
Table of Contents
