Foxconn 915M03 Series Manual page 54

v
Delay Prior to Thermal (Default: 16Min)
This option is used to set the delay time before the CPU enters auto thermal
mode. The setting values are: 4 Min, 8 Min, 16 Min, 32 Min.
vThermal Management (Default: Thermal Monitor 1)
This option is used to manage Prescott CPU thermal.
vTM2 Bus Ratio (Default: depend on CPU)
Represents the frequency bus ratio of the throttled performance state that will
be initiated when the on-die sensor gose from not hot to hot.
vTM2 Bus VID (Default: depend on CPU)
Represents the voltage of the throttled performance state that will be initi-
ated when the on-die sensor gose from not hot to hot.
vLimit CPUID MaxVal (Default: Disabled)
The option is used to set limit CPUID MaxVal. The available setting values are:
Disabled and Enabled.
vNX BIOS Control (Default: depend on CPU)
When disabled, forces the NX feature flag to always return 0. The available
setting values are: Disabled and Enabled.
46
CPU Feature Menu
915M03 Series User Manual
Chapter 3 BIOS Description