Advertisement
ASSEMBLY
float/cage assembly
WARNING: For your own safety, never connect plug
to power source outlet until all assembly steps are
complete and you have read and understood
the
safety and operation Instructions.
Do not operate
vac with any parts damaged or missing.
1. Remove the top section of the vac from the drum and
the drum itself out of the carton. Place the top section
of vac upside down into the drum or place on a clean
smooth surface.
l
I
2. Locate the float. Place the float over the opening in
the center of the lid with the words "This Side Towards
Lid" laying lace down over the hole.
WARNING:
To avoid personal Injury or damage to
vac, be sure to keep hands, fingers, or any other
foreign objects Out of the center opening when
assembling the float.
FILTER
:AGE
FLOAT
\
SOLID END
SLOTS
LID
COLLECTOR-
3. Line up filter cage tabs to the slots in the center ring
of the lid assembly.
4. Push on the filter cage until the tabs snap into the
slots for a secure fit.
TABS,
SLOTS(3)
Advertisement
