Installation - Electrolux WA 1668 User Manual

Problem
The drum is empty and
the display shows
there is some weight in
(J).
The drum is full but the
display shows 0.0 kg
(J).
After the check, activate the appliance. The
programme continues from the point of in-
terruption.
If the problem occurs again, contact the
service centre.
If the display shows other alarm codes,
contact the service centre.
Service

INSTALLATION

Unpacking
1. Use the gloves. Remove the external
film. If necessary, use a cutter.
2. Remove the cardboard top.
3. Remove the polystyrene packaging
materials.
Possible cause
Incorrect temperature was set.
Too much laundry load.
It is necessary to set a tare.
You loaded the laundry before
to activate the appliance.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
Possible solution
Make sure that you set the correct tem-
perature.
Decrease the laundry load.
Press button
ance and to activate it again.
Press button
ance. Empty the drum and obey to the
necessary steps. (Refer to 'Loading the
laundry')
Refer to the information supplied with this
appliance for guarantee condition and point
of contact. The information to give to the
service is on the rating plate.
We recommend that you write the information
here:
Model
(MOD.)
Product number
(PNC)
Serial number
(S.N.)
4. Remove the internal film.
1
to deactivate the appli-
1
to deactivate the appli-
..................
..................
..................
23