400 MAINTAINING YOUR VEHICLE
4. Rotate the applicable bulb's electrical connector one-
quarter turn counterclockwise and remove it from the
taillamp housing.
1 — Tail/Stop Lamp
2 — Turn Signal Lamp
5. Remove the bulb from the connector socket and install
the replacement bulb.
6. Install the bulb and connector assembly into the
taillamp housing and rotate the connector one-quarter
turn clockwise to lock it in place.
7. Reinstall the taillamp housing.
Changing the Backup Lamp
1. Open the trunk.
2. Rotate the bulb's electrical connector one-quarter turn
counterclockwise and remove it from the housing.