Dimplex SF3202 Service Manual
Hide thumbs Also See for SF3202:

Advertisement

MODEL SF3202
SERVICE MANUAL
7400670000R02

Advertisement

Table of Contents
loading

Summary of Contents for Dimplex SF3202

  • Page 1 MODEL SF3202 SERVICE MANUAL 7400670000R02...
  • Page 2: Table Of Contents

    Contents  OPERATION ..........................2   REMOTE CONTROL OPERATION ..................3   REPLACEMENT PARTS ......................7   WIRING DIAGRAM ........................8   LOWER BULB REPLACEMENT ....................9   UPPER BULB REPLACEMENT ....................10   TO REPLACE LED/SWITCH HARNESS ................. 11   TO REPLACE FLAME SPEED CONTROL ................
  • Page 3: Operation

    It can be reset by switching the MAIN ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on. CAUTION If you need to continuously reset the heater, unplug the unit and call Dimplex North America Limited at 1-800-668-6663.
  • Page 4: Remote Control Operation

    SF3202 REMOTE CONTROL OPERATION Initializing the Remote Control 1. Turn on the electrical power at the circuit breaker. 2. Slide open the battery cover on the back of the remote transmitter. 3. Install three AAA batteries into the remote control. Replace the battery cover.
  • Page 5 SF3202 Timer Mode 1. You can set the timer to the length of time you want the unit to operate 2. (1 to 120 minutes). 3. Press the TIMER button once. The timer display will blink --- 4. Press the UP and DOWN buttons to adjust the timer display in minutes.
  • Page 6 SF3202...
  • Page 7 SF3202...
  • Page 8: Replacement Parts

    SF3202 REPLACEMENT PARTS FIREPLACE 32” - SYMPHONY CATALOGUE NO. SF3202 SF3202 PART NO. 6901340159 6901340159 MOD LEVEL: MADE IN: CANADA CANADA REPLACEMENT PART REPLACEMENT PART NO. 1. LOG SET 0438550100RP 0438550100RP 2. HEATER ASSEMBLY 2000230100RP 2000230100RP 3. LOWER LIGHT HARNESS...
  • Page 9: Wiring Diagram

    SF3202 WIRING DIAGRAM...
  • Page 10: Lower Bulb Replacement

    SF3202 If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 11: Upper Bulb Replacement

    SF3202 If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 12: To Replace Led/Switch Harness

    SF3202 If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 13: To Replace Flame Speed Control

    SF3202 If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 14: To Replace Flame Motor/Flame Rod

    SF3202 If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 15: To Replace Heater On/Off Switch

    SF3202 If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 16: To Replace Heater Assembly

    SF3202 If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 17: To Replace The Circuit Board

    SF3202 If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 18: To Replace The Power Cord

    SF3202 If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 19: Troubleshooting Guide

    SF3202 TROUBLESHOOTING GUIDE GENERAL Service Manual Problem Cause Solution Reference Circuit breaker trips Additional appliances may or fuse blows when exceed the current rating of unit is turned on the circuit breaker or fuse. Improper circuit current rating Plug unit into another outlet...
  • Page 20: Heater

    SF3202 TROUBLESHOOTING GUIDE HEATER Service Manual Problem Cause Solution Reference Defective heater on/off switch Replace heater on/off switch Page 13 Heater is not turning off Improper operation See User’s Guide Loose wiring Trace wiring in unit Page 7 Defective heater on/off switch...
  • Page 21: Noise

    SF3202 TROUBLESHOOTING GUIDE HEATER (CONTINUED) Service Manual Problem Cause Solution Reference Loose wiring Trace wiring in unit Page 7 Heater fan runs Defective heater on/off switch Replace heater on/off switch Page 13 continuously Defective heater assembly Replace heater assembly Page 14...

Table of Contents