Kenmore 30" Ceramic Installation Instructions Manual page 2

Overhead Cabinet Should Not Exceed a
Maximum Depth of 13" (33 cm)
30" (76.2 cm) Min.
Clearance Between the
Top of the Cooking
Platform and the Bottom
of an Unprotected Wood
or Metal Cabinet
24" (61 cm) Min.
when Bottom of Wood jF
or Metal Cabinet
is Protected by Not
Less Than 1/8" Flame
Retardant Millboard
Covered With Not Less
Than No. 28 MGS Sheet
Steel, 0.015" (0.4 mm)
Stainless Steel, 0.024"
(0.6 ram) Aluminum or
0.020" (0.5 mm) Copper
I(Min. Recommended I
Distance Between Rear
Edge of Cutout and
Nearest Combustible 10"
Surface Above ( 25.4 cm)
Countertop
18" F
(45.7 cm)
] Min. From Edge of
,p to Nearest
Combustible Wall
(Either Side of Unit).
2 1/2" (6.4 cm) Min. From E ge
of Cutout to Front Edge of
Countertop
Approximate Location
of Junction Box
It is not recommended to use drawer
underneath cooktop. Empty space is
needed for installation purpose.
Letters on this figure refer to chart on front page except for ] & K.
_To eliminate the risk of burns or
fire by reaching over heated surfaces,cabinet
storage space located above the cooktop should
be avoided. If cabinet storage is provided, risk
can be reduced by installing a range hood that
projects horizontally a minimum of 5" (12.7 cm)
beyond the bottom of the cabinets.
30"(76.2cm) 7½"(19.1cm) 2" (5.1cm)
Figure 2 - COUNTERTOP CUTOUT OPENING
2