Helpful Hints; Unpacking - Keurig K40 Elite Owner's Manual

Set-Up

helpful hints

1. Plug brewer into its own grounded outlet.
If the electric circuit is overloaded with other
appliances, your brewer may not function
properly. The brewer should be operated on
its own circuit, separate from other appliances.
2. Keep your brewer turned "ON."
To brew a fresh cup of coffee, tea or hot cocoa
anytime you want, keep your brewer turned
"ON" all the time. However, you can set the
brewer to automatically turn off two hours after
your last brew. Follow the simple instructions
on page 10 to make using the brewer convenient
for you.
3. For the best tasting gourmet coffee, tea or
hot cocoa, Keurig recommends using bottled
or filtered water.
Water quality varies from place to place.
If you notice an undesirable taste in your
cup of coffee, tea or hot cocoa (such as chlorine
or other mineral tastes) we recommend you
consider using bottled water or water from a
filtration system. For best results, carefully
follow manufacturer's instructions when using
any water filtration system.
4. Customize the size, flavor & brew that's
perfect for you.
With the choice of over 200 varieties of K-Cup
packs and 3 brew sizes (Small Cup-5.25 oz.,
Small Mug-7.25 oz. and Large Mug-9.25 oz.),
your Keurig brewer gives you endless options
®
to customize the size, flavor and brew that's
perfect for you. For a strong, intense cup, select
an Extra Bold K-Cup pack (with up to 30%
®
more ground coffee than regular varieties) and
brew size that's right for you. The smaller the
brew size, the more intense flavor in your cup.
The larger the brew size, the less intense flavor
in your cup.
5. Remove K-Cup pack after use.
®
Please see page 7 for brewing instructions.
6. Brewing into a travel mug.
To brew into a travel mug, simply remove the
Drip Tray Assembly and place the travel mug
on the Drip Tray Base.
7. De-scale brewer regularly.
Please see pages 11 and 12 for instructions.
unpacking Instructions
Place brewer box on a large steady surface
1.
(such as a table or countertop) or on the floor.
Open the box.
4
Remove enclosed literature.
2.
Turn the box on its side with front of box
3.
®
face down.
Reach into the box and grasp the plastic
4.
bag that contains the brewer.
5. Carefully pull the plastic bag (and packaging
materials) toward you and out of the box. The
brewer will still be encased in the polyfoam
and be on its side.
Remove the top polyfoam packaging material.
6.
Carefully lift brewer off of the bottom polyfoam
7.
and place it upright on a flat, steady surface.
Lift plastic bag off of brewer.
8.
Record the serial number for this brewer on
9.
page 3 of this guide. The serial number can be
found on the bottom of the brewer box or on the
brewer behind the Drip Tray (when removed).
Place the brewer upright on a flat, steady
10.
surface. Remove tape holding Water Reservoir
in place.
We recommend you save all packing materials in
case future shipping of the product is necessary.
WARNING:
Keep all plastic bags away
from children.