Setting The Speaker Mode; Setting The Delay Time - Samsung HT-KX715 User Manual

SETTING THE SPEAKEr MODE

Signal outputs and frequency responses from the speakers will automatically be adjusted according to
your speaker configuration and whether certain speakers are used or not.
1. In Stop mode, press the MENU button.
. Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
. In the SPEAKEr SETUP, press the ENTEr or + button again.
.
Press the Cursor $, %, _, + button to move to the desired
speaker and then press the ENTEr button.
~ For C, SL, and SR, each time the button is pressed, the mode
switches alternately as follows : SMALL  NONE.
For L and R, the mode is set to SMALL.
~
~ SMALL : Select this when using the speakers.
NONE : Select this when no speaker is connected.
~
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M
`
Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 56).

SETTING THE DELAY TIME

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay
time of the audio signals from the center and rear speakers.
1. In Stop mode, press the MENU button.
. Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
.
Press the Cursor % button to move to DELAY TIME and then
press the ENTEr or + button.
. Press the ENTEr button.
5. Press the Cursor _, + button to set the Delay time.
~ You can set the delay time for C between 00 and 05mSEC and
for SL and SR between 00 and 15mSEC.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
MOVE ENTER RETURN EXIT
MOVE CHANGE EXIT
RETURN
51