Front/rear Tallboy Stand (HT-TKX715 only)
Speaker Components
SPEAKER
How to Install the Speaker on the Stand
1.
Turn the STAND upside-down and connect it to the STAND BASE.
.
Turning the SCrEW (Small) clockwise, connect it to four holes marked with the
arrow using a screwdriver as shown in the illustration.
.
Connect the assembled stand to the SPEAKEr.
.
Turning the SCrEW (Large) clockwise, connect to a hole on the
screwdriver as shown in the illustration.
5.
This is the successfully assembled speaker.
M
`
Make sure that the TALLBOY type speaker should be installed on the fl at and stable area. Otherwise it may
fall down due to external shock.
STAND
STAND BASE
SCREW (Large) :
4EA
SCREW (Small) :
16EA
1
STAND
BASE
STAND
SPEAKER
STAND
5
1