SETTING THE TEST TONE
Use the Test Tone feature to check the speaker connections.
1.
In Stop mode, press the MENU button.
.
Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
.
Press the Cursor % button to move to TEST TONE and then press
the ENTEr or + button.
The test tone will be sent to L C r Sr SL SW in
~
order.
If the ENTEr button is pressed again at this time, the test tone
~
will stop.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE DrC (DYNAMIC rANGE COMPrESSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at night.
1.
In Stop mode, press the MENU button.
.
Press the Cursor % button to move to Audio and then press
the ENTEr or + button.
.
Press the Cursor % button to move to DrC and then press the
ENTEr or + button.
.
Press the Cursor $, % to adjust the DrC.
When the Cursor $ button is pressed, the effect is greater,
~
and when the Cursor % button is pressed, the effect is
smaller.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
MOVE
ENTER
RETURN
EXIT
STOP
EXIT
MOVE
ENTER
RETURN
EXIT
CHANGE
EXIT
RETURN
5