Cleaning The Inlet Filter - Samsung VACUUM CLEANER Operating Instructions Manual

DJ68-00178A(EN)-0.1 2/22/03 2:43 PM
6

CLEANING THE INLET FILTER

1
NOTE :
Do not allow the filter to become clogged as this may cause power reduc-
tion or may damage the motor.
7
OUTLET FILTER
1
- IF YOU HAVE A PROBLEM
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
Vacuum cleaner does not
pick up dirt.
Page 7
2 3
2
CAUSE
No power supply.
Thermal cut-out.
Nozzle, suction hose or tube
is blocked.
Check that the cord is not
twisted or wound unevenly.
Crack or hole in hose.
6
REMEDY 0
Check cable, plug and socket.
Leave to cool.
Remove the object and
empty/wash cassette filter as
required.
Pull the cord out 2-3m and
push down the cord rewind
button.
Check hose and replace if
required.