Download  Print this page

Troubleshooting - SAMSUNG Plasma TV User Manual

Series 6 plasma tv.
Hide thumbs



Before contacting the Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local
No sound or picture
Normal picture but no sound
No picture or black and white
Sound and picture
Blurred or snowy picture,
distorted sound
Remote control malfunctions
Screen is black and power
indicator light blinks steadily
The damaged picture appears
in the corner of the screen.
The "Resets all settings to
the default values" message
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the button on your set.
Check the picture contrast and brightness settings.
Check the volume.
Check if Speaker Select is set to External Speaker.
Check the volume.
Check whether the M MUTE button has been pressed on the remote control.
Adjust the colour settings.
Check that the broadcast system selected is correct.
Try to identify the electrical appliance that is affecting the television, then move it further away.
Plug the television into a different main socket.
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check that the + and – ends of the batteries are inserted correctly.
Check that the batteries are drained.
On your computer check; Power, Signal Cable.
Move the computer's mouse or press any key on the keyboard.
On your equipment check (STB, DVD, etc) ; Power, Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
If Screen Fit is selected in some external devices, the damaged picture may appear in the
corner of the screen. This symptom is caused by external devices, not TV.
This appears when you press and hold the EXIT button for a while.
The product settings are reset to the factory defaults.
English - 66


Table of Contents

   Also See for SAMSUNG Plasma TV

   Related Manuals for SAMSUNG Plasma TV

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: