Channel Control Storing Channels - Samsung Plasma TV User Manual

Channel Control
Storing Channels
Area
❑
You can change the desired area.
Auto Store
❑
Scans for all channels with active broadcast stations (and availability depends on your
country) and stores them in the TV's memory.
If you want to stop Auto Store, press the ENTERE button.
N
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTEREbutton.
Manual Store
❑
Scans for a channel manually and stores it in the TV's memory.
• Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
• Colour System → Auto / PAL / SECAM / NTSC4.43 / NTSC 3.58: Sets the colour system value using the ▲ or ▼ button.
• Sound System → BG / DK / I / M: Sets the sound system value using the ▲ or ▼ button.
• Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or
S (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~) buttons to select the required number.
You can also select the channel number directly by pressing the number (0~) buttons.
N
If there is abnormal sound or no sound, reselect the sound standard required.
N
• Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
• Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER E button.
Channel mode
N
- C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
- S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Channel Mode
❑
When the press the P
• Added Ch.: Channels will be switched within the memorized channel list.
• Favourite Ch.: Channels will be switched within the favourite channel list.
Fine Tune
❑
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk *.
N
If you do not store the fine-tuned channel in memory, adjustments are not saved.
N
To reset the fine-tuning, select Reset by pressing the ▼ button and then press the ENTER E button.
N
/ button, channels will be switched within the selected channel list.
English - 1
Area : Asia/Europe
Auto Store
Manual Store
Channel List
Channel Mode : Added Ch.
Fine Tune
►