Network; Network Connection - Samsung Plasma TV User Manual

Series 6 plasma tv
Hide thumbs Also See for Plasma TV:
Table of Contents

Advertisement

Network

Network Connection

Network Connection - Cable
LAN Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below.
Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter
them manually.
The Modem Port
on the Wall
1. Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable.
. Connect the LAN port on the wall and the external modem with a Modem Cable.
You can connect the LAN via a Sharer (Router).
The Modem Port
on the Wall
You can connect the LAN port and the TV directly depending on your network status.
The LAN Port
on the Wall
The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.
N
If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds
N
and then try again.
For the connections between the external modem and the Sharer (Router), refer to the owner's manual of the corresponding
N
product.
You can connect the TV to the LAN directly without connecting it through a Sharer (Router).
N
You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automatic-
N
connection-type ADSL modem.
External Modem
(ADSL/VDSL/Cable TV)
Modem Cable

External Modem
(ADSL/VDSL/
Cable TV)
LAN Cable
Modem Cable
LAN Cable
English - 45
TV Rear Panel
LAN Cable
1
IP Sharer
LAN Cable
TV Rear Panel
TV Rear Panel
Continued...

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps50b650Ps58b680Ps63b680

Table of Contents