Operating The Cleaner; Power Cord; Power Control - Samsung VACUUM CLEANER Operating Instructions Manual

Hide thumbs Also See for VACUUM CLEANER:
Table of Contents

Advertisement

2

OPERATING THE CLEANER

2-1 POWER CORD

2-3 POWER CONTROL

1) BODY-CONTROL TYPE
MIN = For delicate surface e.g. net curtains.
MAX = For hard floors and heavily soiled carpets.
2) REMOTE-CONTROL TYPE
SENDER
INFRARED-CONTROL
2-4 AIR CONTROL
To reduce suction for cleaning draperies, small rugs, and other
light fabrics, pull the tap air until the hole is open.
2-5 USING THE BLOWER
Located on the left rear side of the cleaner.
1) Disconnect the hose from the body of the cleaner.
2) Connect the hose clamper to the blow hole.
NOTE
Grasp the plug to
disconnect cord from
the electrical outlet.
CONTROL-BUTTON
RECEIVER
POWER LAMP
ON/OFF switch button
3
2-2 ON/OFF SWITCH
Press control button repeatedly
to select correct mode.
(STOP ➝ MIN ➝ MID ➝ MAX ➝ STOP)
When pushed the "ON/OFF" switch button,
the Power lamp is turned on automatically.
BODY CONTROL TYPE ONLY

Advertisement

Table of Contents
loading

Table of Contents