Operating The Cleaner - Samsung SC8571 Operating Instructions Manual

2

OPERATING THE CLEANER

2-1 POWER CORD
Please make sure your
cable is fully extended
before use.
2-2 POWER CONTROL (INFRARED CONTROL)
- HOSE
SENDER
HANDLE CONTROL
[The cleaner is controlled by using
infrared signals.]
- BODY
The filter light is illuminated when the dust
pack requires checking or emptying.
An audio signal will also sound.
The IR light indicates the part that
receives the infra-red signal from the
handle control.
1. Vacuum cleaner ON/OFF
Press the ON/OFF button to operate the vacuum cleaner.
Press again to stop the vacuum cleaner.
2. Vacuum cleaner MODE (+/-)
Press the MODE button repeatedly to select the correct
mode.
(ON) MIN → MID → MAX
3. Using Auto mode
Press the Auto button to operate the vacuum
cleaner automatically.
Press the power control button repeatedly to select the
correct mode.
(ON(MAX) → OFF)
NOTE :
If the remote handle control is not
working, the cleaner can be operated
using the control button on the body of
the machine.
This shows the generation of negative ions
when the vacuum cleaner is in operation.
This indicates that the automatic suction
mode is selected.
The level of suction is indicated by the
LED display.
EN-3
NOTE
When removing the
plug from the
electrical outlet, grasp
the plug, not the cord.