Ipod® Operation - Jensen VM9125 Operating Instructions Manual

VM9125
iPod® OPERATION
®
NOTE: Be sure your iPod has the latest Apple firmware installed to avoid
connectivity issues.
®
Accessing iPod Mode
®
This unit is Made for iPod® and iPhone®. You can control your iPod via touch
screen to access Playlist, Artist, Albums, Songs, etc. Supported models include, but
are not limited to the following:
• iPhone® 4S / 4 / 3GS / 3G and 1st Generation
• iPod®touch 4th / 2nd and 1st Generation
• iPod® nano 6th / 5th / 4th and 3rd Generation
• iPod® classic and iPod® with video
®
The unit will automatically switch to iPod mode when an iPod®, iPod® touch or
iPhone is plugged into the front USB connector.
®
NOTE: For basic iPod connectivity, you can use the white 30-pin to USB iPod® cable
that came with your Apple device . For iPod® video or photo playback, you must
purchase the jLink-USB cable.
To return to the iPod® menu from any other source menu, touch SRC on the front
panel until the iPod® menu appears on the screen, or choose the iPod® icon from
the source menu (only available when an iPod® or iPhone® is connected to the USB
connector)
39