Inserting A Disc; Ejecting A Disc; Resetting The Loading Mechanism; Stopping Playback - Jensen VM9125 Operating Instructions Manual

VM9125
Controlling Playback

Inserting a Disc

Upon inserting a CD, disc play begins. You cannot insert a disc if there is already a
disc in the unit or if the power is off.

Ejecting a Disc

Press the button on the front of the unit to eject the disc. The unit automatically
reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will remain off after the
disc is ejected.

Resetting the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the button to reset the loading mechanism. Normal operation
resumes.

Stopping Playback

Touch the Stop ( ) icon to stop disc play.
To resume playback, touch the Pause/Play ( ) icon.

Pausing Playback

Touch the Pause/Play ( ) icon to suspend or resume disc play.
Moving Through Tracks
Touch the Next ( ) icon to advance to the next track on the disc.
Touch the Previous ( ) button to move to the previous track.

Repeat Playback

Touch the icon to alter repeat mode according to the following:
• DVD: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• CD-DA: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• CD-R/RW: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• DVD-R/RW: Repeat Single > Repeat Folder > Repeat All > Repeat Off
Random Play Select
Touch the Random ( ) icon to play the tracks on the disc in a random, shuffled
order. Touch the Random ( ) icon again to cancel Random Play mode.
NOTE: CD-R and CD-RW will not play unless the recording session is finalized.
32