Ipod ® Operation - Jensen JCV2015BT Installation And Operation Manual

iPod OPERATION
®
This unit is equipped with an iPod® ready function that will allow you to control your iPod (if
compatible) using the control panel buttons. The following models are supported:

iPod Nano 6G, 7G

iPod Classic

iPod Touch 4G, 5G

iPhone 4, 4S, 5, 5C, 5S
NOTE: Earlier model iPods are not supported because they do not implement the
required control protocol. Also, the iPod shuffle is not supported because it does not
utilize the 30-pin Apple iPod Connector. These unsupported iPod models may be
connected to the radio using one of the Auxiliary Inputs.
Accessing iPod Mode
Connect a supported iPod or iPhone to the USB
connector (17). The word "iPod" illuminates in the
upper left corner of the LCD whenever an iPod or
iPhone is attached to the USB connector. Music
playback begins automatically.
To enter iPod mode from any other source, press the
MODE button (4) until "iPod" appears on the display.
If the user connects an iPod containing no songs, the
radio will display a message stating "No Songs" when
it enters iPod mode.
Turning the iPod On/Off
The iPod power turns on automatically when an iPod is connected to the USB connector, as
long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it or by
turning the ignition off. When the ignition is turned off, the iPod will pause and then enter sleep
mode after 2 minutes. While the iPod is connected, the power cannot be turned on or off from
the iPod itself.
NOTE: The iPod will continuously recharge while in iPod playback mode.
Controlling Playback
Selecting Tracks
During playback, press the TUNE/SEEK |<< / >>| button (18, 19) to play the previous or next
track in the current category Press the TUNE/SEEK |<< button (18) once to play the song from
the start position or press TUNE/SEEK |<< twice to play the previous track. Pressing the
TUNE/SEEK |<< button (18) during the first 2 seconds of a track will play the previous track.
After 2 seconds, this action return to the beginning of the current track.
Press and hold the TUNE/SEEK |<< / >>| button (18, 19) to fast reverse/forward the song.
Pausing Playback
During playback, press the MUTE/>|| button (24) to pause playback. "Pause" will appear on the
LCD. Press MUTE/>|| again to resume playback.
Repeat Play
During playback, press the 1/RPT button (8) to repeat the current song. "RPT" will appear on
the LCD. Press 1/RPT again to stop repeat playback.
Random Play
During playback, press the 3/RDM button (5) to play all songs in the current category in random
order. Random play will begin once the current song has finished playing. "RDM" will appear on
the LCD. Press 3/RDM again to stop random playback.
NOTE: If you press and hold the TUNE/SEEK |<< or >>| button to change the current song
to the previous/next song, you will exit fast reverse/forward mode.
Playlist Search
Press the PTY/CAT/MENU button (2) to access Playlist selection mode. While in Category
mode, press the TUNE/SEEK |<< / >>| buttons (18, 19) to choose file search by Playlist, Artist,
Album, Genre, Song, Audiobook or Podcast. Press the INFO/ENTER button (16) to select the
search mode. Use the TUNE/SEEK |<< / >>| buttons to search the available files on the iPod.
Press the INFO/ENTER button to play the selected song or file.
Alternate Display Mode
Press the DISP/SCROLL button (12) to change the display information between single and
double line text display.
15
JCV2015BT